Понеделник, 2024-12-23, 6:33 AM
Welcome Guest

Меню
Уроци
Анкета
Пред компютъра или пред телевизора предпочитате да сте?
Общо гласували: 167
Начало » 2009 » Януари » 16 » Как да създадете Абстрактна Фото Манипулация»

Как да създадете Абстрактна Фото Манипулация
11:05 AM





 1

Отидете  Тук и си изтеглете снимката,след което я отворете с  Photoshop. Сега отидете в  Image>Rotate Canvas>90°CW за да получите това:

Grunge paper texture

2

В панела със слоеве направете нов  hue/saturation adjustmentслой и направете настройките .

Hue/Saturation tool

 3

Ние ще използваме изображение на папагал; главно защото папагалите са многоцветни, но можете да използвате вашия собствен образ ако искате. Тази снимка която аз използвах можете да намерите  Тук така че направете копие на това изображение във вашия документ, след това оразмерите за да изглежда като  на снимката  по-долу.


A photo of a parrot added to the document

 4

Now probably the least enjoyable part of any photo manipulation; the extraction, it's worth get good at it though as you get quick after doing it a lot. So we only want the parrot, not the lake or the the white pole. Unless you've already got a solid way you like to extract images then use the way I'm about to teach you. Select the image of the parrot then click on the layer mask button in the layers panel to add a mask, if your not familiar with masks then basically if you paint black onto a mask then it will hide that part of the layer and the opposite goes for white, at the moment the whole mask is white so everything in the layer is visible. Select black as the foreground color then make sure the mask is selected not the layer. Now select the brush tool and use a round brush with about 80% hardness, start off with a diameter of about 30px although you'll have to change this a lot so do so by using the ] key to increase the diameter and the [ key to decrease. Now you just have to brush round the parrot, you wont need to be too accurate here as we're going for a grungy look anyway, I was pretty neat because I tend to use image that I've extracted multiple times. this was the part that I started on and I had to decrease the brush size to get into the bit next to the red feather.

Closeup of parrots wings

I lowered the hardness of the brush to 0% for this part as the feathers need to look soft.

Closeup of parrots tail

This is what it looked like after cutting the parrot out, well done if you've made it this far it's easy sailing from here on.

Masked parrot on grunge paper texture

Step 5

We are going to use some watercolor brushes to create the painted effect, watercolor brushes have become really popular recently and the set I tend to use can be found hereso download and install them; you may need to restart Photoshop to get them properly installed. We are going to create all the watercolor effects behind the parrot so create a new layer then move it below the layer with the parrot in it. Select the eyedropper tool then click somewhere on the tail(is that what its called?), this is to get a reddish color that matches the color of the bird. Now select the brush tool and choose one of the watercolor brushes then click once to get the effect shown below. If you want to rotate the brush then go Window>Brushes>Brush Tip Shape and move the arrow in the circle that looks like a compass.


Watercolor brush added

Step 6

Do this again twice using different brushes and use yellow and blue as the colors. You should end up with something similar to the image below.

Different watercolor brush added

Step 7

I then used some splatter brushes in random colors to add some more detail which you can see below. Feel free to use different brushes but I liked the effect gained from using the splatter brushes.

Splatter brushes added

Step 8

You now need to find an image of a rainforest or a jungle, ideally something with lots of green plants. I tend to get my stock images from SXC so copy an image then paste it into your document and move it behind the watercolor strokes then resize it and position it like so.

Jungle image added

Step 9

Select the layer with your jungle image then hold Alt and click on the layer mask button to, this time, create a black layer mask so this will hide your jungle image. Change the foreground color to white then select the layer mask then the brush tool and using a 0% hardness brush of about 100px diameter brush at parts round the parrot to unhide bits of the plants. In this step I only did the bits around the parrots back.


Jungle image masked

Step 10

I then repeated the last two steps for the parts below the part, you may have done this already in the previous step which is fine.

Previous step repeated

Step 11

This is an optional step but also an opportunity for you to add some personal touches. You will need some cool patterns, you can download these, use the ones that come with Photoshop or make your own, I've written loads of tutorials which include the creation of patterns, 45° lines, Photoshop's transparent pattern, diamond plating. What I did was to select the pattern stamp tool, chose a pattern and used either a splatter brush or a watercolor brush then brushed onto a new layer below the parrot layer.

Unique textures added

Step 12

Create a new layer directly below the parrot then select the brush tool and choose a 2px hard round brush. Now using a few different bright colors draw some long freehand lines and make the pretty random and go wild. Use about three or four different colors, I've shown a couple of examples below.


Checkerboard pattern Diagonal lines pattern Abstract photo manipulation

Step 13

Next I added some details using the shape tools, I've shown some below so add a few of each in a new layer each time, you decide if it should be above or below the parrot. Here I used the line tool to create some crosses, I used a weight of 2px and held Shift to get the lines at 45°.

More detail added

I held Shift and used the rectangle tool then reduced the opacity of the layer to give a semi-transparent effect.

Traslucent rectangule

Just some simple circles her, I added a few of these dotted about.

Simple circles

I added some more simple shapes in different colors like the white rings but I'm sure you've got the idea now.

Abstract photo manipulation

Step 14

Last thing to do in almost any Photoshop image is to experiment with some color adjustments, the way I see it is if your a beginner then use the hue/saturation adjustment layer, an intermediate then go for the color balance adjustment layer and if you have a bit more experience or feel adventurous then try the curves adjustment layer. I added a curves adjustment layer with the settings shown below and mainly lowered the output of the blue channel increased the rest as the image was looking to cold I felt.

Curves tool

Conclusion

Obviously there's a lot further you can take this but the techniques I've shown here are really all you need to create an abstract photo manipulation like this one.


Abstract photo manipulation


Прегледи: 633 | Добавен от: psworld |
Екипът на PSWORLD Ви благодари за проявения интерес!
  Призоваваме Ви да оставяте своите коментари за публикуваните уроци и новости.Пишете ни за Вашите проблеми и успехи в усвояването на Фотошоп. Публикувайте резултатите от Вашите опити. Така ще ни помогнете да се развиваме в правилната посока!

Общо коментари: 0
Качи картинка:(копирай кода на  "Thumbnail за Форуми" и го постави във формата за отговор)
Само регистрирани потребители могат да оставят коментари.
[ Регистрация | Login ]
Login form
Календар
«  Януари 2009  »
НеПоВтСрЧеПеСб
    123
45678910
11121314151617
18192021222324
25262728293031
    
Търсене

Наши приятели
Статистика

Всичко online: 14
Гости: 14
Потребители: 0
<